passend Jeep® Wrangler JK 2-Türer LHD
3,5" Fahrwerk, d.h. ca. 90 mm höher
Nicht nur eine tolle Optik sondern auch das Fahrverhalten wird verbessert. Allte Teile sind optimal aufeinander abgestimmt.
Lieferumfang:
Federn vorne + hinten
Bilstein Stoßdämpfer
Panhardstab
Panhardstab Halter
Verlängerung Halter Bremsleitungen
Achsanschläge
High Steer Schubstange
ProCal Modul
Unterlage Wagenheber
Stabilisatoren hinten
Einbauanleitung
TÜV-Bericht
Bitte beachten:
Bei Diesel Fahrzeugen wird ein CRD Tube benötigt und bei 3,6 l Fahrzeugen einen Auspuffadapter.
Wir empfehlen vor Beginn der Winterzeit alle Bauteile mit Schutzwachsen zu behandeln.
AEV 3.5" DualSport SC Suspension System with Bilstein Shocks
For 07-14 Jeep® Wrangler Unlimited JK 2 Door with LHD
AEV has set out to engineer what should prove to be the best all-around performing system in the aftermarket. With years of OE suspension engineering experience to bring to the task, AEV has considered all the qualities that make up a great overland-style 4WD: Ground clearance, articulation, load-carrying capability, ride quality and of course, high-speed stability. Special care has been given to spring frequencies, shock tuning and roll-center geometry. The end result is a JK that remains balanced under all circumstances. Whether cruising across town or over hundreds of miles of dirt track, the AEV -equipped Jeep JK becomes the true do-it-all 4WD platform. Best of all with the Premium Kits the AEV ProCAL Module is now included!
RS Kit includes: SC kit with the Bilstein 5160 Remote Reservoir Shocks instead of 5100 Series.
SC Kit includes: ST kit plus roll-center adjusted front steering kit, Steering Damper, AEV Jack Base (for use with stock scissor jack and tall tires) and the AEV ProCAL Module.
ST Kit includes: Frequency-tuned progressive-rate coil springs, custom-tuned Bilstein shocks, bump-stop spacers, brakeline drop brackets, custom rear track-arm, roll-center-adjusted rear track-arm tower, sway-bar links and front lower cam bolts.
** AEV is proud to offer the single biggest improvement to our JK Suspension since it was released. These new Front Control Arm Brackets are a win-win in terms of performance.
These new brackets will:
Improve front impact ride quality (expansion joints, ledges)
Increase Anti-Dive for improved braking performance
Decrease the operating angle range of the front driveshaft
Eliminate the need for adjustable control arms or cam bolts for caster correction
Parts Included
Front and Rear Coil Springs
Bilstein 5100 Shocks
Heavy Duty Steering Stabilizer
Front and Rear Bump Stops
Front and Rear Brake Line Brackets
Custom Rear Track Bar
Rear Axle Side Track Bar Bracket
Sway Bar Links
Front Control Arm Geometry Drop Brackets**
Front Axle Side Track Bar Bracket with Steering Stabilizer Mount
High Steer Drag Link
AEV Jack Base
AEV ProCAL Module
|
