Jeep Wrangler TJ/LJ Jeep Cherokee XJ/MJ 2" Johnny Joint Currie CE-9120TJJ

Jeep Wrangler TJ/LJ Jeep Cherokee XJ/MJ 2" Johnny Joint Currie CE-9120TJJ
Részletek


CE-9120TJJ - TJ/XJ/LJ/MJ Johnny Joint® JeepSpeed Front Trac Bar



Jeep Wrangler TJ
Jeep Cherokee XJ

2" Johnny Joint Panhardstab einstellbar vorne TJ/XJ/LJ/MJ





JOHNNY JOINT® HEAVY DUTY ADJUSTABLE TRAC BAR FOR TJ/XJ/LJ/MJ JEEPSPEED APPLICATIONS W/ 1/2" HOUSING BOLT



Description: The all new and improved Johnny Joint® trac bar for the TJ/XJ/LJ/MJ features an offset Johnny Joint® rod end that puts the bar further forward providing more clearance between the diff and the trac bar. Other features include 1 1/4" x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint®, heavy duty adjustor end with urethane bushing and steel insert sleeve, and semi-gloss black powder coat finish. Some drilling is required for installation. The supplied frame bolt is a 5/8", and the supplied housing bolt is 1/2". Both of these holes must be drilled to size to accommodate the heavier duty hardware. A heavy duty nut plate kit is supplied for the housing end. NOTE: This trac bar is intended to be used with a minimum of 2" of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9" or 60 frontend, you may run into a clearance issue. Always check fitment before drilling! Weight: 12 Lbs, Height: 5 In., Width: 4 In., Length: 36 In.



Unit of Measure: Sold each.


Adatok
Alkatrész
Futómű és felfüggesztés
Típus
Jeep Grand Cherokee
Cikkszám
CE-9120TJJ